S4K 4U-C 6kVA 6U-C 10kVA

By -
SolaHD™ S4K4U-C 6 kVA

SolaHD™ S4K4U-C 6 kVA and S4K6U-C 10 kVA Industrial On-Line UPS

S4K4U-C 6 kVA and S4K6U-C 10 kVA Industrial On-Line UPSs are the first true online industrial uninterruptible power systems that provide flexible output voltage, an integrated maintenance bypass switch, and internal batteries all in a slim 4U (7.0") or 6U (10.5") enclosure. They feature a double-conversion topology to provide the ultimate protection against a wide range of potential power problems.



Features

  • cULus, Federal Communications Commission
  • True double-conversion topology. User-replaceable, the hot-swappable internal battery module
  • Higher power factor of 0.80 (6kVA) and 0.90 (10kVA). Automatic frequency detection (60 or 50 Hz)
  • Both models offer 208/120V or 240/120V
  • Configurable as a tower or rack mounting. Easily installed in 18” to 32” deep rack using rack mount kit # SRS1832
  • Highest density, 6 kVA in only 4U and 10 kVA in only 6U of rack space
  • Includes both automatic and manual maintenance bypass switch
  • Self-diagnostics simplify maintenance and troubleshooting
  • Remote Emergency Power Off (REPO)


Specifications

Capacity (VA/W)6000/4800, 10000/9000
Typical Back-up Time (minutes, full/half load) Internal Battery 6000/4800: 4/13; 10000/9000: 5/14
Audible Noise Less then 55 dBA @ 3.2FT rear, Less then 50 dBA @ 3.2FT front/sides
Hertz 50 or 60 Hz
Input Voltage Range 120/208 Vac at 120 °C
Nominal Voltage Range 120/208 Vac
Number of Phases Single Phase
Operating Temperature 0°C to +40°C


Important Safety PRECAUTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety instructions. Read all safety and operating instructions before operating the Uninterruptible Power System (UPS). Adhere to all warnings on the unit and in this manual. Follow all operating and user instructions. This equipment can be operated by individuals without previous training.


This product is designed for commercial/industrial use only. It is not intended for use with life support or other designated “critical” devices. Maximum load must not exceed that shown on the UPS rating label. The UPS is designed for data processing equipment. If uncertain, consult your dealer or local SolaHD representative.


This up is designed for use on a properly grounded (earthed) 50 or 60 Hz supply. The factory default setting is 120/208 Vac, 60 Hz. Installation instructions and warning notices are in this manual.


The S4KC is designed for use with a four-wire input (L1, L2, N, G).

size/6KVA/10KVA price/PKR 358,500.00

Comments

Post a Comment

Popular posts from this blog

Eaton 9390 - 80kVA

By -
Image
The energy-efficient Eaton 9390-80 Model – 80kVA 208V UPS provides backup power and scalable battery runtimes in a small footprint for mid-size data centers, medical equipment, and other critical systems. With the groundbreaking Energy Saver System, the 9390 operates at 99% UPS efficiency and can pay for itself in three to five years—without sacrificing reliability. General • Efficiency- 99% with Energy Saver Mode • Parallel Capability- Four modules with tie cabinet • Audible Noise- <65 dBA @ 1 meter • Altitude (max)- 2000m at 104°F (40°C) Input • Voltage- 208,380,400,415,480,600 • Voltage Range- +10% / -15%2 • Frequency range- 55-65 Hz • Power Factor- 0.99 (min) • Input Current Distortion- • Soft Start Capability- Yes • Internal Backfeed Protection- Yes • Broadcast global support- Yes Output • Voltage- 208,380,400,415,480,600 • Regulation- ±1% • Inverter- PWM with IGBT Switching • Voltage THD- < 2% (100% linear load);< 5% (non-linear load) • Load Power Factor Range- Down to 0...
Read more

715KVA CAT C18

By -
Image
The C18 diesel generator sets have been developed for your mission critical, standby and prime applications. Producing reliable power from 550 to 850 kVA at 50 Hz, each generator set has been designed to meet ISO 8528-5 transient response requirements and built to accept 100 percent rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified. Seismic certification is also available for select models, so you can deliver power despite disturbances. The EMCP 4.2 and optional 4.2B control panels offers fully featured power metering with communications via Modbus RS-485, SCADA, or CAN data links. It's not just quality that matters but customization, choose from a broad range of accessories and bolt-on system expansion attachments. All C18 generator sets are supplied with 4 years Extended Service Coverage when used in a standby application (ESC - for industry leading warranty cover...
Read more

Eaton 9E in 1 kVA UPS

By -
Image
Eaton 9E in 1 kVA UPS Online Double Conversion with Internal Batteries Technical Details Brand Eaton Manufacturer Eaton Model 9103-53862XT1 Product Dimensions 35.6 x 14.4 x 22.8 cm; 9.2 Kilograms Batteries 2 12V batteries are required. (included) Item model number 9103-53862XT1 Special Features Active Input Power Factor Correction 0.99., Double Conversion Efficiency >91% & ECO mode efficiency up to 98%, Inbuilt OVCD (Over Voltage Cut-off device), 100% load @ 0~40C operating temp., IGBT based Rectifier True Online, Double Conversion Robust design, O/P power factor 0.9 (O/P power factor 0.8 for long backup model), Digital Charger Technology provides 02-10A charging current, Generator Compatible with Wide Input voltage window Mounting Hardware 1kVA UPS with Inbuilt batteries 9AH x 2 ...
Read more